Stainless Steel Plate-2205

2205 Stainless Steel Plate Features

Is poured with molten steel, cooled and pressed into flat steel.
It is flat, rectangular and can be rolled directly or cut from a wide strip of steel.
According to the thickness of steel plate, thin steel plate <4 mm (the thinnest 0.2 mm), medium thick steel plate 4~60 mm, extra thick steel plate 60~115 mm.
The steel plate is rolled into hot rolling and cold rolling.
The width of the sheet is 500~1500 mm; The width of the thickness is 600~3000 mm. Thin plates are classified by steel types, including ordinary steel, high quality steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, silicon steel and industrial pure iron sheet, etc. According to the professional use, there are oil drum with board, enamel with board, bulletproof with board, etc. According to the surface coating points, there are galvanized sheet, tin plate, lead plate, plastic composite steel plate.
Request Information

Specification of 2205 Stainless Steel Plate

Thickness of cold rolled steel plate Thickness of galvanized steel sheet Wearing plate+Corrosion resistance plate Galvanized coil+Galvanized coil Ction volume Stainless steel plate Thick plate
0.1mm 0.1mm 1.5mm 0.1mm 0.1mm 1.5mm 18mm
0.2mm 0.2mm 2.0mm 0.2mm 0.2mm 2.0mm 20mm
0.3mm 0.3mm 2.5mm 0.3mm 0.3mm 2.5mm 22mm
0.4mm 0.4mm 2.75mm 0.4mm 0.4mm 2.75mm 25mm
0.5mm 0.5mm 3.0mm 0.5mm 0.5mm 3.0mm 28mm
0.6mm 0.6mm 3.5mm 0.6mm 0.6mm 3.5mm 30mm
0.7mm 0.7mm 3.75mm 0.7mm 0.7mm 3.75mm 32mm
0.8mm 0.8mm 4.0mm 0.8mm 0.8mm 4.0mm 35mm
0.9mm 0.9mm 4.5mm 0.9mm 0.9mm 4.5mm 40mm
1.0mm 1.0mm 4.75mm 1.0mm 1.0mm 4.75mm 42mm
1.2mm 1.2mm 5.0mm 1.2mm 1.2mm 5.0mm 45mm
1.3mm 1.3mm 5.5mm 1.3mm 1.3mm 5.5mm 48mm
1.4mm 1.4mm 5.75mm 1.4mm 1.4mm 5.75mm 50mm
1.5mm 1.5mm 6.0mm 1.5mm 1.5mm 6.0mm 52mm
1.6mm 1.6mm 6.5mm 1.6mm 1.6mm 6.5mm 55mm
1.8mm 1.8mm 6.75mm 1.8mm 1.8mm 6.75mm 58mm
1.9mm 1.9mm 7.5mm 1.9mm 1.9mm 7.5mm 60mm
2.0mm 2.0mm 7.75mm 2.0mm 2.0mm 7.75mm 62mm
2.1mm 2.1mm 8.0mm 2.1mm 2.1mm 8.0mm 65mm
2.2mm 2.2mm 8.5mm 2.2mm 2.2mm 8.5mm 68mm
2.4mm 2.4mm 8.75mm 2.4mm 2.4mm 8.75mm 70mm
2.5mm 2.5mm 9.5mm 2.5mm 2.5mm 9.5mm 72mm
2.6mm 2.6mm 9.75mm 2.6mm 2.6mm 9.75mm 75mm
2.7mm 2.7mm 10mm 2.7mm 2.7mm 10mm 80mm
2.8mm 2.8mm 10.5mm 2.8mm 2.8mm 10.5mm 82mm
3.0mm 3.0mm 11.5mm 3.0mm 3.0mm 11.5mm 85mm
3.2mm 3.2mm 11.75mm 3.2mm 3.2mm 11.75mm 90mm
3.4mm 3.4mm 12mm 3.4mm 3.4mm 12mm 100mm
3.5mm 3.5mm 12.5mm 3.5mm 3.5mm 12.5mm 110mm
3.6mm 3.6mm 12.75mm 3.6mm 3.6mm 12.75mm 120mm
3.8mm 3.8mm 13.75mm 3.8mm 3.8mm 13.75mm 140mm
4.0mm 4.0mm 14mm 4.0mm 4.0mm 14mm 150mm
4.2mm 4.2mm 14.5mm 4.2mm 4.2mm 14.5mm 160mm
4.5mm 4.5mm 14.75mm 4.5mm 4.5mm 14.75mm 170mm
4.6mm 4.6mm 15mm 4.6mm 4.6mm 15mm 180mm
4.8mm 4.8mm 15.5mm 4.8mm 4.8mm 15.5mm 190mm
5.0mm 5.0mm 16mm 5.0mm 5.0mm 16mm 200mm
Get a quote

Ingredient list Of 2205 Stainless Steel Plate

Grade C Mn Si P S Cr Mo Ni N    
304 Min. / / / / / 18 / 8 /    
Max. 0.08 2 0.75 0.045 0.03 20 10.5 0.1    
304L Min. / / / / / 18 / 9 /    
Max. 0.03 2 1 0.045 0.03 20 11    
304H Min. 0.04 / / 0.045 / 18 / 8 /    
Max. 0.1 2 0.75 / 0.03 20 10.5    
Grade Tensile Strength Yield Strength Elongation Hardness              
(MPa)聽 0.2% Proof (MPa)聽 (% in 50mm) Rockwell B Brinell              
      (HR B) (HB)              
304 515 205 40 92 201              
304L 515 205 40 90 187              
304H 515 205 40 92 201              
                         

Processing Technology Of 2205 Stainless Steel Plate

With the development of science and technology and industry, the materials put forward higher requirements, such as higher strength, resistance to high temperature, high pressure, low temperature, corrosion resistance, wear and other special physical and chemical properties of the requirements, carbon steel has been unable to fully meet the requirements.

Deficiency of carbon steel:
(1) Low hardenability. In general, the maximum quenching diameter of carbon steel water quenching is only 10mm-20mm.

(2) Relatively low strength and buckling. For example, the σ S of ordinary carbon steel Q235 steel is 235MPa, while the σ S of low alloy structural steel 16Mn is more than 360MPa. The σ S /σ B of 40 steel is only 0.43, which is much lower than that of alloy steel.

(3) Poor tempering stability. Because of the poor tempering stability, carbon steel in the quenching and tempering treatment, in order to ensure higher strength to use a lower tempering temperature, so that the toughness of steel is low; In order to ensure better toughness, the strength of high tempering temperature is low, so the comprehensive mechanical properties of carbon steel is not high.

(4) Can not meet the requirements of special performance. Carbon steel in oxidation resistance, corrosion resistance, heat resistance, low temperature resistance, wear resistance and special electromagnetic and other aspects are often poor, can not meet the needs of special performance.

Price Range Of 2205 Stainless Steel Plate

$600-$3000

Get a Quote